Voltage ups and downs
Fridges, ACs and TVs burn out when the supply swings. We check the line and fit protection and stabilisers rated for the load.
Safe wiring. Honest electrical work.
pakelectroo handles house and shop wiring, fault finding, power backup and electronics repair. Send us a photo of the problem on WhatsApp and we will tell you what it needs.
Sparks, a burning smell or a hot socket? Switch off the main breaker first, then message us.
- Power off before work starts
- Cable and breakers rated for the load
- Every circuit tested before handover
- Estimate agreed before we begin
What we do
Electrical work for homes, shops and workshops, plus electronics repair and engineering advice.
-
House and building wiring
New wiring, rewiring of old homes, concealed and surface conduit, distribution boards and load planning so circuits are not overloaded.
-
Electrical fault finding
Tripping breakers, short circuits, flickering lights, voltage drops, hot sockets and earth leakage. We trace the cause instead of replacing parts at random.
-
Earthing and protection
Earthing, MCBs and RCCBs, surge protection and safe grounding of appliances, so a fault trips a breaker instead of shocking someone.
-
Power backup
UPS and inverter connections and generator changeover switches, installed so backup power never feeds back into the line.
-
Electronics repair and supply
Power supplies, control boards, UPS and inverter faults, sensors and controllers. We also source components and advise on the right ratings.
-
Engineering and inspection
Load calculations, single-line diagrams, material lists and cost estimates, and a written check of existing wiring before you buy or rent a property.
Also available on request: lighting and fan installation.
Problems we fix in Pakistani homes and shops
بجلی کا مسئلہ؟ ہمیں واٹس ایپ کریں
Load shedding backup
UPS, inverter or generator wired so the fans, lights and fridge stay on, and power never feeds back into the line.
Shocks and missing earthing
A tingle from the fridge, geyser or washing machine body means earthing is missing or faulty. We test it and fix it.
Old and overloaded wiring
Undersized cable, extension-board chains and several ACs on one circuit. We rewire to the real load.
How a job runs
The same five steps every time, so you know what happens and what it costs before we touch anything.
-
You message us
Describe the problem and send photos of the wiring, board or device.
-
We check the site
We look at the fault in person or review your photos, and measure what needs measuring.
-
You get an estimate
Work and materials are listed and agreed before we start.
-
We do the work
Power is isolated, work follows the agreed plan, and the area is left clean.
-
We test and hand over
Each circuit is tested, and we show you what was done and how to use it safely.
Our work
Photos of electrical work.
What customers say
Who we work for
Homes
Rewiring, new construction, DB boards, earthing, fans, lights, UPS and inverter wiring.
Shops and offices
Lighting layouts, extra circuits for equipment, backup power and cabling that stays tidy and labelled.
Workshops and small factories
Machine supply lines, panels, protection devices and fault diagnosis that keeps downtime short.
Questions people ask
What should I send on WhatsApp?
A short description of the problem, your area, and one or two clear photos or a short video of the wiring, board or device. The more we can see, the better the first answer.
Will I know the cost before work starts?
Yes. We list the work and materials and agree the price with you first. If we find something extra once the work is open, we tell you before going ahead.
Do you supply the materials?
We can supply cable, breakers, switches and fittings, or you can buy them yourself. Either way we tell you the correct size and rating so the wiring matches the load.
Can you fix a device, not just wiring?
We repair power supplies, UPS and inverter faults and control boards. If a repair is not worth the cost, we say so rather than charging you for it. Prices are quoted in PKR.
Why do my breakers keep tripping?
Usually an overloaded circuit, a faulty appliance, damaged insulation or moisture. Do not replace the breaker with a bigger one. Message us and we will find the actual cause.
Tell us about the job
The fastest way to reach us is WhatsApp. Send a message with photos and we will reply with next steps.
- WhatsApp and phone: +92 300 8537376